Jste přihlášen jako: Neregistrovaný | Přihlášení

Nejste přihlášen. Nezapomeňte se přihlásit nebo zaregistrovat!

Zaslat odpověď   Tisk vlákna    Poradna -> Hardware

as well as


PříspěvekZaslal: pá Zář 14, 2018 3:33    Předmět: as well as Citovat

As https://www.omc-stepperonline.com/nema-23-stepper-motor/ being the Sun sank on evening two in the EQ-6 check-ride, the sky wasn't looking good, not great at all. Not completely dark, no, but hazy by using large swathes of slender clouds slowly drifting by. Still, I figured it becomes good enough for phase 2, making sure the bracket would still goto its gotos at bay by a laptop personal computer.

One thing I wished to try in that regard was the new SkyWatcher ASCOM driver. Formerly, I’d used a Celestron driver for that EQ-6. That worked okay, no problem, but lately, with the advent in the new Celestron unified driver, support for the Celestron scopes https://www.omc-stepperonline.com/nema-23-stepper-motor/ were being discontinued, I had also been told. I could simply have used a mature Celestron driver, but I desired to see how your SkyWatcher one worked.
With my Scopestuff SynScan serial cable plugged in the base of the hand control plus the other into my KeySpan USB-Serial converter, MY PARTNER AND I proceeded to fire in place the Stellarium/StellariumScope combo, which can be about all I use to manipulate my goto scopes today. Hokay, selected the brand new SkyWatcher driver, hit Get in touch, and immediately got some sort of warning about my hands control. Said text informed me that the driver wouldn’t work having a https://www.omc-stepperonline.com/ version 2 HC, needing at least a Version 4 or 5. Rut-roh.

I was puzzled since I do have got a version 3 HC. It doesn’t develop the very latest firmware filled, no. It is at v3. 37 instead in the current 3. 38, but that's still pretty recent. Following I dismissed the caution window, however, everything looked like normal. I was sitting down on Vega, and the onscreen scope crosshairs were on Vega also. I clicked on M13, strike the CTRL + 1 key combo Stellarium purposes to initiate gotos, as well as mount responded immediately, moving the scope to certainly M13. The big star-ball, nearly https://www.omc-stepperonline.com/ centered inside a 13mm Plössl at 75x, actually looked as good as I thought it would while in the yucky sky.

The exact same was true of any object I requested. I even let your scope track unattended for the half hour or so to check out if the driver would crash, but it didn’t. Consensus? Warning or no caution, the driver worked well.

I took another gander at M13 along with a peep at M92, as well as, as I was pondering whether there were anything else that would look good on such a putrid nights, the sky well as well as truly closed down with a https://www.omc-stepperonline.com/stepper-motor-driver/ big thud. I covered scope and mount as well as left the mosquitoes in order to fend for themselves.

Our next morning, I investigated the motive force issue further. It ended up that what it was attempting to tell me was that we did indeed need SynScan firmware version 3. 38 for complete operability. I’m not sure which top features of the driver might not seek advise from 3. 37—goto was fine which can be all I care in relation to. At any rate, I will be a big fan of “if it ain’t split, don’t fix it, ” and believe I can leave it to your stepper motor driver mount’s next owner to make the decision whether to upgrade the particular HC to 3. 38.

Just one major thing remained at my testing agenda. There’s computer control, and then you can find EQMOD. If you’ve got or are considering buying a SynScan build I’m sure you’ve heard about that, but what it's is a special ASCOM driver. It doesn’t just send goto commands for the mount, it replaces the SynScan hand controller—much just like the NexRemote program replaces Celestron’s NexStar HC. I began using EQMOD using the mount not long after I purchased the Atlas within November of 2007, as well as its capabilities have often impressed me.
Přidat nové téma   Zaslat odpověď   Tisk vlákna    Poradna -> Hardware Strana 1 z 1

Odeslat rychlou odpověď:

Přejdi na:  
Můžete přidat nové téma do tohoto fóra.
Můžete odpovídat na témata v tomto fóru.
Nemůžete upravovat své příspěvky v tomto fóru.
Nemůžete mazat své příspěvky v tomto fóru.
Nemůžete hlasovat v tomto fóru.
Můžete k příspěvkům připojovat soubory.
Můžete stahovat a prohlížet přiložené soubory.